• Stop Number

  • :

  • 10

  • Elevator Speed

  • :

  • 1,5 m/sn

  • Elevator Type

  • :

  • Double Speed
    VVVF Speed

  • Codification

  • :

  • You can follow whole cable with number systems.
    Codes designed according the project so it provides ease when you following the steps.

  • Call buttons and lamps require only one shared wire.
  • Simple and error fee installation due to included terminals. Economical and Time saving.
  • Cabin serial communication output.
  • All parameters can easily be configured via LCD screen and keyboard buttons.
  • Adjustable parking station and travelling time.
  • Programming with password protection, code protection against unauthorized using.
  • Position information by Pulse bi-stable switches.
  • Adjustable maintenance time, and warning on LCD screen when maintenance is required.
  • The function of manual movement at low speed by using program buttons.
  • Short-circuit protected display outputs can be adjusted to every floor.
  • For lifts that have only one fully automatic door, the floor of the position of the automatic door can be chosen.
  • The display outputs are changeable to gray-code or binary outputs.
  • Overload warning signal
  • At inspection the movement to limit switches or exact floor level can be chosen.
  • Adjustable car lamp time, lock wait time, wait at floor time, max high speed time and max low speed time.
  • Outputs for direction arrows, Out Of Service signal and busy signal via 5A relay, a signal common input for these outputs.
  • Related to request, when power returns after a power loss, the car moves to the first floor.
  • Electronic control of phases, phase order and PTC (Motor temperature), errors of these controls shown via LCD on board, turning off function by choosing the parameters, adjustable phase level sensitivity.
  • Warning signal on LCD screen when the door is open for a long time or when the stop return circuit is not detected for a long time.