-
Call buttons and lamps require only one shared wire.
-
Cabin serial communication output.
-
All parameters can easily be configured via LCD screen and keyboard buttons.
-
Adjustable parking station and travelling time..
-
Programming with password protection, code protection against unauthorized using.
-
Position information by Pulse bi-stable switches.
-
Adjustable maintenance time, and warning on LCD screen when maintenance is required.
-
The function of manual movement at low speed by using program buttons.
-
Short-circuit protected display outputs can be adjusted to every floor.
-
For lifts that have only one fully automatic door, the floor of the position of the automatic door can be chosen.
-
The display outputs are changeable to gray-code or binary outputs.
-
Overload warning signal
-
At inspection the movement to limit switches or exact floor level can be chosen.
-
Adjustable car lamp time, lock wait time, wait at floor time, max high speed time and max low speed time.
-
Outputs for direction arrows, Out Of Service signal and busy signal via 5A relay, a signal common input for these outputs.
-
Related to request, when power returns after a power loss, the car moves to the first floor.
-
Electronic control of phases, phase order and PTC (Motor temperature), errors of these controls shown via LCD on board, turning off function by choosing the parameters, adjustable phase level sensitivity.
-
Warning signal on LCD screen when the door is open for a long time or when the stop return circuit is not detected for a long time.
|
|
|
|
|
